Description
FortiGate 7040E Specifications:
- Manufacturer: Fortinet, Inc
- Brand Name: Fortinet
- Product Line: FortiGate
- Product Series: 7000E
- Product Model: 7040E
- Fortinet Processor Module (FPM) Slots: 2
- Fortinet Interface Module (FIM) Slots: 2
- Shelf Manager: 1
- Firewall Throughput: (1518 / 512 / 64 byte, UDP): 315 / 310 / 200 Gbps
- Firewall Latency: (64 byte, UDP): 7.00 μs
- Firewall Throughput (Packet per Second): 300 Mpps
- Concurrent Sessions (TCP): 160 Million
- New Sessions/Sec (TCP): 950,000
- Firewall Policies: 200,000
- IPsec VPN Throughput (512 byte): 100 Gbps
- Gateway-to-Gateway IPsec VPN Tunnels: 16,000
- Client-to-Gateway IPsec VPN Tunnels: 64,000
- SSL-VPN Throughput: 15 Gbps
- Concurrent SSL-VPN Users (Recommended Maximum): 48,000
- IPS Throughput (Enterprise Mix): 60 / 100 Gbp
- SSL Inspection Throughput: 39.9 / 60 Gbps
- SSL Inspection CPS (IPS, avg. HTTPS): 32,500
- SSL Inspection Concurrent Session (IPS, avg. HTTPS): 12 Million
- Application Control Throughput: 80 Gbps
- NGFW Throughput: 50 / 60 Gbps
- Threat Protection Throughput: 40 / 48 Gbps
- CAPWAP Throughput: N/A
- Virtual Domains (Default / Maximum): 10 / 500
- Maximum Number of FortiSwitches Supported: 256
- Maximum Number of FortiAPs (Total / Tunnel Mode): N/A
- High Availability Configurations: Active-Active (FGSP), Active- Passive, Clustering
Note: All performance values are “up to” and vary depending on system configuration, for more information check FortiGate 7040E DataSheet
FortiGate 7040E Product Feature:
FortiGate-7040E chassis
- The FortiGate-7040E is a 6U 19-inch rackmount 4-slot chassis with a 80Gbps fabric and 1Gbps base backplane designed by Fortinet. The fabric backplane provides network data communication and the base backplane provides management and synch communication among the chassis slots.
- Power is provided to the chassis using three hot swappable 2+1 redundant 100-240 VAC, 50-60 Hz power supply units (PSUs).
- You can also optionally add a fourth PSU. The FortiGate-7040E can also be equipped with three or four DC PSUs allowing you to connect the chassis to -48V DC power.
FortiGate-7040E front panel
- The FortiGate-7040E chassis is managed by a single System Management Module (SMM) that includes an Ethernet connection as well as two switchable console ports that provide console connections to the modules in the chassis slots.
- The SMM controls chassis cooling and power management and provides an interface for managing the FIMs and FPMs installed in the chassis.
- The standard configuration of the FortiGate-7040E includes two FIMs (interface modules) in chassis slots 1 and 2 and two FPMs (processing modules) in chassis slots 3 and 4.
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base backplane switching and fabric backplane session-aware load balancing for the chassis. The FIM modules include an integrated switch fabric and DP2 processors to load balance millions of data sessions over the chassis fabric backplane to FPM processor modules. The following FIM modules are available:
- The FIM-7901E includes thirty-two front panel 10GigE SFP+ fabric channel interfaces (A1 to A32). These interfaces
can be connected to 10Gbps networks. These interfaces can also be configured to operate as Gigabit Ethernet
interfaces using SFP transceivers. - The FIM-7904E includes eight front panel 40GigE QSFP+ fabric channel interfaces (B1 to B8). These interfaces
can be connected to 40Gbps networks. Using 40GBASE-SR4 multimode QSFP+ transceivers, each QSFP+
interface can also be split into four 10GBASE-SR interfaces and connected to 10Gbps networks. - The FIM-7910E includes four front panel 100GigE CFP2 fabric channel interfaces (C1 to C4). These interfaces can
be connected to 100Gbps networks. Using 100GBASE-SR10 multimode CFP2 transceivers, each CFP2 interface
can also be split into ten 10GBASE-SR interfaces and connected to 10Gbps networks. - The FIM-7920E includes four front panel 100GigE QSFP28 fabric channel interfaces (C1 to C4). These interfaces
can be connected to 100Gbps networks. Using a 100GBASE-SR4 QSFP28 or 40GBASE-SR4 QSFP+ transceiver,
each QSFP28 interface can also be split into four 10GBASE-SR interfaces and connected to 10Gbps networks.
